Factory Cheap Machine Tissue - Toilet Paper Machine Cylinder Mould Type – Dingchen
Factory Cheap Machine Tissue - Toilet Paper Machine Cylinder Mould Type – Dingchen Detail:
| 1.Raw material | Waste books paper |
| 2.Output paper | Toilet paper;Tissue paper |
| 3.Output paper weight | 15-30 g/m2 |
| 4.Output paper width | 1200-3200mm |
| 5.Wire width | 1450-3650 mm |
| 6.Capacity | 2-15 Tons Per Day |
| 7. Working speed | 50-180m/min |
| 8. Design speed | 80-210m/min |
| 9.Rail gauge | 1800-4300 mm |
| 10.Drive way | Alternating current frequency conversion adjustable speed, sectional drive |
| 11.Layout | Left or right hand machine |
Waste books paper →Stock preparation system→Cylinder mould part→Dryer part→Reeling part
Requirements for Water, electricity, steam, compressed air and lubrication:
1.Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8
2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2
3.Working steam pressure for dryer ≦0.5Mpa
4. Compressed air
● Air source pressure：0.6～0.7Mpa
● Working pressure：≤0.5Mpa
● Requirements： filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃
1.Raw material consumption: 1.2 tons waste paper for producing 1 ton paper
2.Boiler fuel consumption: Around 120 Nm3 natural gas for producing 1 ton paper
Around 138 liter diesel for making 1 ton paper
Around 200kg coal for making 1 ton paper
3.Power consumption: around 250 kwh for producing 1 ton paper
4.Water consumption: around 5 m3 fresh water for making 1 ton paper
5.Operating personal: 7 workers/shift, 3 shifts/24hours
Product detail pictures:
Related Product Guide:
Our purpose is to fulfill our clients by offering golden company, great price and premium quality for Factory Cheap Machine Tissue - Toilet Paper Machine Cylinder Mould Type – Dingchen , The product will supply to all over the world, such as: Comoros, Malaysia, Sydney, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Jeff Wolfe from Honduras - 2018.06.03 10:17
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Denise from Portland - 2017.08.18 11:04
