Factory making Cost Of Tissue Paper Making Machine - Toilet Paper Machine Cylinder Mould Type – Dingchen
Factory making Cost Of Tissue Paper Making Machine - Toilet Paper Machine Cylinder Mould Type – Dingchen Detail:
1.Raw material | Waste books paper |
2.Output paper | Toilet paper;Tissue paper |
3.Output paper weight | 15-30 g/m2 |
4.Output paper width | 1200-3200mm |
5.Wire width | 1450-3650 mm |
6.Capacity | 2-15 Tons Per Day |
7. Working speed | 50-180m/min |
8. Design speed | 80-210m/min |
9.Rail gauge | 1800-4300 mm |
10.Drive way | Alternating current frequency conversion adjustable speed, sectional drive |
11.Layout | Left or right hand machine |
Waste books paper →Stock preparation system→Cylinder mould part→Dryer part→Reeling part
Requirements for Water, electricity, steam, compressed air and lubrication:
1.Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8
2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2
3.Working steam pressure for dryer ≦0.5Mpa
4. Compressed air
● Air source pressure:0.6~0.7Mpa
● Working pressure:≤0.5Mpa
● Requirements: filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃
1.Raw material consumption: 1.2 tons waste paper for producing 1 ton paper
2.Boiler fuel consumption: Around 120 Nm3 natural gas for producing 1 ton paper
Around 138 liter diesel for making 1 ton paper
Around 200kg coal for making 1 ton paper
3.Power consumption: around 250 kwh for producing 1 ton paper
4.Water consumption: around 5 m3 fresh water for making 1 ton paper
5.Operating personal: 7 workers/shift, 3 shifts/24hours
Product detail pictures:
Related Product Guide:
Each individual member from our large performance revenue crew values customers' needs and company communication for Factory making Cost Of Tissue Paper Making Machine - Toilet Paper Machine Cylinder Mould Type – Dingchen , The product will supply to all over the world, such as: Durban, Malta, Peru, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.
By Olive from Detroit - 2017.11.29 11:09
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Diana from New Orleans - 2018.12.10 19:03