page_banner

High Quality for Kraft Paper Making Machine For Paper Mill - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen

High Quality for Kraft Paper Making Machine For Paper Mill - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for Paper Tube Machine, Paper A4 Machine, Sugar Paper Machine, Welcome your enquiry, greatest service is going to be provided with full heart.
High Quality for Kraft Paper Making Machine For Paper Mill - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen Detail:

1.Raw material  Old Carton,OCC
2.Output paper  Testliner paper,Kraftliner paper,Fluting paper,Kraft paper,Corrugated paper
3.Output paper weight  80-300 g/m2
4.Output paper width  1800-5100mm
5.Wire width  2300-5600 mm
6.Capacity  20-200 Tons Per Day
7. Working speed 50-180m/min
8. Design speed 80-210m/min
9.Rail gauge  2800-6200 mm
10.Drive way  Alternating current frequency conversion adjustable speed, sectional drive
11.Layout  Left or right hand machine

Old cartons →Stock preparation system→Cylinder mould part→Press part→Dryer group→Sizing press part→Re-dryer group→Calendering part →Reeling part→Slitting&Rewinding part

Requirements for Water, electricity, steam, compressed air and lubrication:

1.Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8

2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2

3.Working steam pressure for dryer ≦0.5Mpa

4. Compressed air
● Air source pressure:0.6~0.7Mpa
● Working pressure:≤0.5Mpa
● Requirements: filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃

(1)The seller will provide technical support and send engineers for installation, test run the whole paper production line and training the buyer’s workers
(2)As different paper production line with different capacity, it will take different time to install and test run the paper production line. As usual, for regular paper production line with 50-100t/d, it will take about 4-5months,but mainly depend on the local factory and workers’ cooperation situation.
(3)The buyer shall be responsible for the salary, visa, round trip tickets, train tickets, accommodation and quarantine charges for the engineers


Product detail pictures:

High Quality for Kraft Paper Making Machine For Paper Mill - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen detail pictures

High Quality for Kraft Paper Making Machine For Paper Mill - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen detail pictures

High Quality for Kraft Paper Making Machine For Paper Mill - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen detail pictures

High Quality for Kraft Paper Making Machine For Paper Mill - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen detail pictures


Related Product Guide:

With our loaded encounter and considerate services, we have now been recognized as a trustworthy supplier for lots of worldwide consumers for High Quality for Kraft Paper Making Machine For Paper Mill - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen , The product will supply to all over the world, such as: Honduras, Birmingham, Eindhoven, Our products and solutions are sold to the Middle East, Southeast Asia, Africa, Europe, America and other regions, and are favorably appraised by clients. To benefit from our strong OEM/ODM capabilities and considerate services, be sure to contact us today. We will sincerely create and share success with all clients.
  • Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
    5 Stars By Evelyn from Morocco - 2018.08.12 12:27
    We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
    5 Stars By Sandy from Germany - 2018.07.26 16:51