OEM/ODM Factory Toilet Paper Recycling Machine - Toilet Paper Machine Cylinder Mould Type – Dingchen
OEM/ODM Factory Toilet Paper Recycling Machine - Toilet Paper Machine Cylinder Mould Type – Dingchen Detail:
1.Raw material | Waste books paper |
2.Output paper | Toilet paper;Tissue paper |
3.Output paper weight | 15-30 g/m2 |
4.Output paper width | 1200-3200mm |
5.Wire width | 1450-3650 mm |
6.Capacity | 2-15 Tons Per Day |
7. Working speed | 50-180m/min |
8. Design speed | 80-210m/min |
9.Rail gauge | 1800-4300 mm |
10.Drive way | Alternating current frequency conversion adjustable speed, sectional drive |
11.Layout | Left or right hand machine |
Waste books paper →Stock preparation system→Cylinder mould part→Dryer part→Reeling part
Requirements for Water, electricity, steam, compressed air and lubrication:
1.Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8
2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2
3.Working steam pressure for dryer ≦0.5Mpa
4. Compressed air
● Air source pressure:0.6~0.7Mpa
● Working pressure:≤0.5Mpa
● Requirements: filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃
1.Raw material consumption: 1.2 tons waste paper for producing 1 ton paper
2.Boiler fuel consumption: Around 120 Nm3 natural gas for producing 1 ton paper
Around 138 liter diesel for making 1 ton paper
Around 200kg coal for making 1 ton paper
3.Power consumption: around 250 kwh for producing 1 ton paper
4.Water consumption: around 5 m3 fresh water for making 1 ton paper
5.Operating personal: 7 workers/shift, 3 shifts/24hours
Product detail pictures:
Related Product Guide:
We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for OEM/ODM Factory Toilet Paper Recycling Machine - Toilet Paper Machine Cylinder Mould Type – Dingchen , The product will supply to all over the world, such as: Vancouver, Colombia, South Africa, We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
By Alberta from Croatia - 2018.11.11 19:52
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Frances from Monaco - 2018.06.09 12:42