PriceList for Carton Paper Making Machine - Cone&Core Paper Board Making Machine – Dingchen
PriceList for Carton Paper Making Machine - Cone&Core Paper Board Making Machine – Dingchen Detail:
1.Raw material | Old Carton,OCC |
2.Output paper | Cone Board Paper,Core Board Paper |
3.Output paper weight | 200-500 g/m2 |
4.Thickness | 0.3-0.7mm |
5.Ply bond | 200-600 |
6.Output paper width | 1600-3800mm |
7.Wire width | 1950-4200 mm |
8.Capacity | 10-300 Tons Per Day |
9. Working speed | 50-180m/min |
10. Design speed | 80-210m/min |
11.Rail gauge | 2400-4900 mm |
12.Drive way | Alternating current frequency conversion adjustable speed, sectional drive |
13.Layout | Left or right hand machine |
Waste paper →Stock preparation system→Cylinder mould part→Press part→Dryer group→Calendering part →Reeling part→Slitting&Rewinding part
Requirements for Water, electricity, steam, compressed air and lubrication:
1.Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8
2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2
3.Working steam pressure for dryer ≦0.5Mpa
4. Compressed air
● Air source pressure:0.6~0.7Mpa
● Working pressure:≤0.5Mpa
● Requirements: filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃
Product detail pictures:
Related Product Guide:
We've got a specialist, effectiveness staff to supply high quality service for our shopper. We always follow the tenet of customer-oriented, details-focused for PriceList for Carton Paper Making Machine - Cone&Core Paper Board Making Machine – Dingchen , The product will supply to all over the world, such as: Philadelphia, Serbia, Egypt, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Atalanta from Brazil - 2018.06.05 13:10
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Lisa from Slovakia - 2018.02.12 14:52