Quality Inspection for Paper Recycler Making Machine - Insole Paper Board Making Machine – Dingchen
Quality Inspection for Paper Recycler Making Machine - Insole Paper Board Making Machine – Dingchen Detail:
1.Raw material | OCC,Waste papers |
2.Output paper | Insole Paper Board |
3.Output paper thickness | 0.9-3mm |
4.Output paper width | 1100-2100mm |
5.Wire width | 1350-2450 mm |
6.Capacity | 5-25 Tons Per Day |
7. Working speed | 10-20m/min |
8. Design speed | 30-40m/min |
9.Rail gauge | 1800-2900 mm |
10.Drive way | Alternating current frequency conversion adjustable speed, sectional drive |
11.Layout | Left or right hand machine |
Waste papers →Stock preparation system→Cylinder mould part→Press, cutting and paper off-loading part→Natural dry→Calendering part →Edge trimmed part→Printing machine
Requirements for Water, electricity, compressed air:
1.Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8
2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2
3. Compressed air
Air source pressure:0.6~0.7Mpa
Working pressure:≤0.5Mpa
Requirements: filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃
Product detail pictures:
Related Product Guide:
carry on to further improve, to guarantee merchandise high-quality in line with market and buyer standard necessities. Our organization has a top quality assurance procedure have already been established for Quality Inspection for Paper Recycler Making Machine - Insole Paper Board Making Machine – Dingchen , The product will supply to all over the world, such as: moldova, Lebanon, Hungary, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
By Heloise from India - 2018.02.21 12:14
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Deirdre from Thailand - 2017.05.02 18:28