Top Suppliers Kraft Pulp Mill - Fourdrinier Kraft & Fluting Paper Making Machine – Dingchen
Top Suppliers Kraft Pulp Mill - Fourdrinier Kraft & Fluting Paper Making Machine – Dingchen Detail:
1.Raw material | Waste paper,Cellulose |
2.Output paper | Fluting paper,Kraft paper |
3.Output paper weight | 70-180 g/m2 |
4.Output paper width | 1800-5100mm |
5.Wire width | 2350-5700 mm |
6.Capacity | 20-400 Tons Per Day |
7. Working speed | 80-400m/min |
8. Design speed | 100-450m/min |
9.Rail gauge | 2800-6300 mm |
10.Drive way | Alternating current frequency conversion adjustable speed, sectional drive |
11.Layout | Left or right hand machine |
Waste paper or Cellulose → Stock preparation system→ Wire part→ Press part→ Dryer group→ Sizing press part→ Re-dryer group→ Calendering part → Paper scanner→ Reeling part→ Slitting&Rewinding part
Requirements for Water, electricity, steam, compressed air and lubrication:
1. Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8
2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2
3. Working steam pressure for dryer ≦0.5Mpa
4. Compressed air
● Air source pressure:0.6~0.7Mpa
● Working pressure:≤0.5Mpa
● Requirements: filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃
1.Project investment and profit analysis
2.Properly designed and precision manufacturing
3.Installation and test-run and training
4.Professional technical support
5.Good after- sale service
Product detail pictures:
Related Product Guide:
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Top Suppliers Kraft Pulp Mill - Fourdrinier Kraft & Fluting Paper Making Machine – Dingchen , The product will supply to all over the world, such as: Swiss, Florence, Belgium, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Diego from Greenland - 2018.02.04 14:13
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Colin Hazel from Greece - 2018.10.01 14:14